nntpchan/doc/running.md

Running NNTPChan

Once you have built NNTPChan and done the initial setup you you can start NNTPChan.

Before running make sure you run the setup command, you only need to do this one time:

./srndv2 setup

You can now start the NNTPChan node (srndv2) by running:

./srndv2 run

Now you can check out the web-interface by navigating to 127.0.0.1:18000 (default address - unless you have changed it in your srnd.ini) or you can configure your newsreader.